Exam Dumps NACE-CIP2-001 Practice Free Latest NACE Practice Tests
NACE-CIP2-001 Exam Questions | Real NACE-CIP2-001 Practice Dumps
NEW QUESTION 15
Thermal Spray coatings provide:
- A. Thermal protection
- B. Barrier protection
- C. Inhibitive protection
- D. Sacrificial protection
Answer: D
NEW QUESTION 16
You are the NACE Level 2 Inspector with the final responsibility to prepare the final report for a very large structural steel shop project which has gone very well. It is due next week. The work has been ongoing for two years and several NACE Level 1 Inspectors have worked under your supervision throughout the project. You find you are missing one week of daily reports for the night shift from the very beginning of the project and despite your best efforts they are cannot found.
You FIRST preferred course of action is to:
- A. Re-create the reports as not much was going on during night shift anyway
- B. Plainly state in your report that they are missing
- C. Use creative writing to cover over the fact they are missing
- D. Do not complete your report until they can be found
Answer: B
NEW QUESTION 17
Inspection and Test Plans are provided to:
- A. So the contractor has a single document to reference
- B. Outline the inspection steps, sequencing and pass/fail criteria
- C. So the Inspector doesn't have to read the entire specification
- D. To supersede the requirements of the product data sheets
Answer: B
NEW QUESTION 18
When completing the Final Inspection report the Inspector should write the report using:
- A. Language that only technical experts would understand
- B. Language that another NACE Inspector would understand
- C. Language that the most would understand
- D. Language that only in the project would understand
Answer: C
NEW QUESTION 19
Examples of non-ferrous metals include
Select All that Apply:
- A. aluminum
- B. iron
- C. mild steel.
- D. copper
Answer: A,D
NEW QUESTION 20
You have just your NACE CIP Level 2 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:
- A. Accept assignment without hesitation
- B. Advise the prospective employer that you cannot accept the position
- C. Meet with the prospective employer to scope of your role
- D. Review the NACE Attestation prior to making a decision
Answer: D
NEW QUESTION 21
Non-Conformance Reports are designed to:
- A. Punish the Contractor for substandard work
- B. Elevate the status of the Inspector
- C. Assist the Owner in negotiating credits from the Contractor
- D. To identify items that do not meet the specification requirements
Answer: D
NEW QUESTION 22
Application of Thermal Spray Coatings requires:
- A. The same skills as welding
- B. Specialized skills supported by training and experience
- C. The same skills as liquid coatings
- D. No particular skills
Answer: B
NEW QUESTION 23
Which surface preparation method uses a dilute acid solution to remove laitance and I roughen the concrete surface?
- A. Sacking
- B. High-pressure water washing
- C. Acid etching
- D. Stoning
Answer: C
NEW QUESTION 24
Galvanizing performs best in which of the following exposures:
- A. pH below 4
- B. pH of 13
- C. pH between 5-10
- D. pH above 12
Answer: C
NEW QUESTION 25
You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to:
- A. Consult your supervisor
- B. Request a re-blast of the item in question
- C. Review the NCR with the other Inspector
- D. Verbally challenge the NCR
Answer: A
NEW QUESTION 26
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?
- A. High-pressure water washing
- B. Acid etching
- C. Sacking
- D. Stoning
Answer: C
NEW QUESTION 27
Coating application to concrete substrates is:
- A. The same as coating steel
- B. Not required as Concrete is inorganic
- C. More challenging than coating steel
- D. Less challenging, than coating steel
Answer: C
NEW QUESTION 28
Generally for safety considerations, waterjetting hose connections use
- A. a long wand.
- B. a whip-lock device.
- C. an oil/water separator.
- D. filters.
Answer: B
NEW QUESTION 29
Which product, is used in conjunction with other coatings such as FBE when the lines run through wetlands or a body of water?
- A. 3-Layet Polyethylene (PE)
- B. 2-Layet Polyethylene (PE)
- C. Concrete
- D. Coal Tar Enamel
Answer: C
NEW QUESTION 30
NACE No.13/ SSPC 6 identifies the use of:
- A. Abrasive blasting only
- B. Watterjetting only
- C. Various methods of cleaning
- D. Steam cleaning only
Answer: C
NEW QUESTION 31
......
Verified NACE-CIP2-001 Exam Dumps Q&As - Provide NACE-CIP2-001 with Correct Answers: https://freedumps.validvce.com/NACE-CIP2-001-exam-collection.html
