[Feb 07, 2022] NS0-176 PDF Recently Updated Questions Dumps to Improve Exam Score
NS0-176 Dumps Full Questions with Free PDF Questions to Pass
NetApp NS0-176 Exam Certification Details:
| Exam Code | NS0-176 FlexPod |
| Duration | 60 minutes |
| Exam Name | Cisco and NetApp FlexPod Implementation and Administration |
| Exam Registration | PEARSON VUE |
| Sample Questions | NetApp NS0-176 Sample Questions |
| Number of Questions | 60 |
NEW QUESTION 57
An administrator has a FlexPod solution with VMware vSphere 6.0. The VMware environment is using FCoE for storage connectivity for datastores.
Virtual machines running Windows Server 2012 R2 and RHEL have a requirement to use RDM LUNs for virtual machine storage. The administrator created an RDM LUN for a Windows 2012 R2 virtual machine and is currently creating an initiator group to map the LUN.
In this situation, which operating system should the administrator select for the initiator group?
- A. Open VMS
- B. VMware
- C. Windows
- D. Linux
Answer: C
NEW QUESTION 58
Which pool of addresses is created under Servers tab in UCS Manager as part of the Service Profile creation process?
- A. WWNN Pools
- B. UUID Suffix Pools
- C. WWPN Pools
- D. MAC Pools
Answer: B
NEW QUESTION 59
You currently have a FlexPod Datacenter solution, and you are merging with another company. That company's environment currently has a mix of different Cisco servers. You want to add as many of those servers to your FlexPod solution as possible.
In this scenario, which two Cisco servers are supported in a FlexPod environment? (Choose two.)
- A. S3260 M5
- B. B200 M5
- C. HX240c Edge M5
- D. C480 ML M5
Answer: B,D
NEW QUESTION 60
Which aggregates should be disabled for data aggregates?
- A. FCP
- B. Snapshot copies
- C. iSCSI
- D. SnapMirror copies
Answer: B
NEW QUESTION 61
Which service may be used to manage users and groups in a vSphere environment?
- A. Domain Name System (DNS)
- B. Network Time Protocol (NTP)
- C. Microsoft Active Directory (AD)
- D. VMware vSphere Storage APIs for Array Integration (VAAI)
Answer: C
NEW QUESTION 62
The storage administrator created an export policy for a volume on a NetApp cluster.
The export policy contains a single export rule with the parameters shown below.
- protocol nfs - rorule any
- clientmatch 10.1.16.0/255.255.255.0 - rwrule any
Two hosts attempt to access the volume using the NFS protocol shown below.
- HostA with IP address 10.1.17.37 sends an access request using the NFSv3 protocol
- HostB with IP address 10.1.16.24 sends an access request using the NFSv4 protocol
Which statement about this scenario is true?
- A. HostA's access to the volume will be blocked by the clientmatch parameter; HostB will be granted RO/RW access to the volume.
- B. HostA will be granted RO/RW access to the volume; HostB's access to the volume will be blocked by the protocol parameter.
- C. HostA's access to the volume will be blocked by the protocol parameter; HostB will be granted RO/RW access to the volume.
- D. HostA's access to the volume will be blocked by the clientmatch parameter; HostB's access to the volume will be blocked by the protocol parameter.
Answer: D
NEW QUESTION 63
Refer to the exhibit.
Which is correct for configuring FCoE?
- A. vlan 33fcoe vsan 43int po11switchport trunk allowed vlan add 33int vfc11bind interface po11switchport trunk allowed vsan 43vsan databasevsan 43 interface vfc11
- B. fcoe vsan 43int po21switchport trunk allowed vsan add 43vsan databasevsan 43
- C. fcoe vsan 43int po11switchport trunk allowed vsan add 43vsan databasevsan 43
- D. fcoe vlan 33int po11switchport trunk allowed vlan add 33vsan databasevsan 33
- E. vlan 33fcoe vsan 43int po21switchport trunk allowed vsan add 43int vfc11bind interface po21vsan databasevsan 43 interface vfc 11
Answer: A
NEW QUESTION 64
Which two technologies must be deployed for a Cisco Nexus 9000 ACI design? (Choose two.)
- A. APIC
- B. spine switch
- C. VSM
- D. LACP
Answer: A,B
NEW QUESTION 65
Which two LIFs are able to failover or migrate to other nodes in the cluster? (Choose two.)
- A. intercluster LIF
- B. cluster LIF
- C. data LIF of protocol iSCSI
- D. data LIF of protocol FCoE
- E. node management LIF
- F. data LIF of protocol NFS
- G. data LIF of protocol CIFS
Answer: B,G
NEW QUESTION 66
For a 'boot from SAN' configuration, which two features must be enabled? (Choose two)
- A. FC
- B. NPIV
- C. VPC
- D. FCOE
- E. UDLD
- F. FCSP
Answer: B,D
NEW QUESTION 67
A Cisco UCS chasis has two power suppliers connected to one PDU and two power supplies connected to another PDU. You would like to protect against the failure of one entire PDU.
In this scenario, which power policy should you configure in UCS Manager?
- A. grid
- B. redundant
- C. N+1
- D. N+2
Answer: A
NEW QUESTION 68
You are asked to install the Virtual Supervisor Module (VSM) software on a Nexus 1000v switch.
Which two sources would you use to install this software? (Choose two.)
- A. PXE boot
- B. VSC plug-in
- C. OVA file
- D. ISO image
Answer: A,D
NEW QUESTION 69
How many VEMs can one server have?
- A. 0
- B. 1
- C. unlimited
- D. 2
Answer: D
NEW QUESTION 70
How should the speed be configured on the Nexus 5548 port connecting to the Nexus 1100-X?
- A. Speed 1G
- B. Speed 1000
- C. Speed 10
- D. Speed 1000000
- E. It should not be configured - the 5548 will auto detect the correct speed
Answer: B
NEW QUESTION 71
Which two statements about HA pairs in a NetApp cluster are true? (Choose two.)
- A. HA pairs in the same chassis are not connected to each other through an HA interconnect.
- B. In the event of a storage failover, the surviving node always takes over the partner's data LIFs.
- C. In the event of a storage failover, the surviving node provides read/write access to the partner's disks until the failed node becomes available again.
- D. Non-disruptive aggregate relocation can be performed between HA pairs without a takeover and giveback.
Answer: B,C
NEW QUESTION 72
You are asked to configure the computer resources in a FlexPod solution to ensure that jumbo frames are configured end-to-end.
Which three actions must you perform to accomplish this task? (Choose three.)
- A. Configure jumbo frames on the switch VLANs.
- B. Enable jumbo frames on all of the switches between the initiator and the iSCI target.
- C. Enable jumbo frames on the operating system adapter.
- D. Set the MTU size to 1500 on the vNIC template
- E. Configure a UCS QoS System Class with the jumbo frames.
Answer: B,C,E
NEW QUESTION 73
An administrator has a FlexPod solution for use with a VMware vSphere 6.0 environment. The virtual environment consists of virtual machines running both Windows Server 2012 R2 and Windows Server 2008.
The administrator determines that the Windows Server 2008 virtual machine VMDKs are misaligned. The problem needs to be solved without incurring downtime on the virtual machines.
Which tool enables the administrator to solve the problem without virtual machine downtime?
- A. VMware vRealize Operations
- B. UCS Central
- C. NetApp Virtual Storage Console
- D. NetApp mbralign toolkit
Answer: D
NEW QUESTION 74
How do the Fabric Interconnect ports connecting to the 2232PP FEX have to be configured?
- A. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Server'
- B. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Auto'
- C. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Uplink'
- D. In UCS Manager, the FI ports connecting to the FEX must be set as type 'FEX'
- E. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Network'
Answer: A
NEW QUESTION 75
A customer asks you to configure QoS on a Cisco Nexus 7000 Series switch within a FlexPod solution.
Which three steps are required to accomplish this task? (Choose three.)
- A. Associate policies and actions with each traffic class.
- B. Perform a shut/no shut on the affected interfaces.
- C. Attach policies to logical or physical interfaces and VLANs.
- D. Define traffic classes.
- E. Attach policies to logical or physical interfaces and VSANs.
Answer: A,D,E
NEW QUESTION 76
An administrator just finished installing Windows Server 2012 (Core) with Hyper-V.
Now the administrator must deploy a new VM using PowerShell with the parameters shown below.
--Name: web server
--Memory: 10 GB
--Hard Drive: Existing Disk (d:\vhd\BaseImage.vhdx)
Which PowerShell command creates the VM based on the Information in the scenario?
- A. New-VM-Name "web server" - MemoryStartupbytes 10 GB- VHDPath d:\vhd\BaseImage.vhdx
- B. New-VM-Name "web server"- MemoryStartupbytes 10 GB - VHDPath d:\vhd\BaseImage.vhdx -NewVHDSireBytes 6000000
- C. new- VM- Name web server- MemoryStartupBytes 10GB- VHDPath BaseImage.vhdx
- D. New-VM-Name web server-MemoryStartupbytes 1 GB- VHDPath BaseImage.vhdx
Answer: A
NEW QUESTION 77
Refer to the exhibit.
What management tool may be used for creating virtual machines?
- A. System Center Orchestrator
- B. MMC
- C. System Center Virtual Machine Manager
- D. Hyper-V Manager
Answer: D
NEW QUESTION 78
You are asked to create an interface group on a NetApp clustered Data ONTAP system. The system is connected to a Cisco Nexus switch in a vPC configuration with the port-channel mode set to active.
Which NetApp interface group made matches this switch configuration?
- A. singlemode
- B. mode active
- C. multimode
- D. multimode_lacp
Answer: A
NEW QUESTION 79
A customer wants to reuse existing networking equipment that was pulled from another data center for a new FlexPod Datacenter solution. They want to know if their switch models are supported.
In this scenario, which two switch models will accomplish this task? (Choose two.)
- A. Cisco Catalyst 9300-48P
- B. Cisco Catalyst 6504
- C. Cisco Nexus 9396PX
- D. Cisco MDS 9250i
Answer: C,D
NEW QUESTION 80
On a NetApp clustered Data ONTAP cluster, a volume named datastorel resides on an aggregate named node1 aggr1 and is mounted into the namespace at the junction path /esx cluster1/ds1.
A VMware virtual machine file named myhost.vmdk is at the root of the volume datastorel. A volume move operation relocates the datastorel volume to an aggregate named node3 aggr1.
In this scenario, what is the full path to the file myhost.vmdk after the volume move is complete?
- A. /esx_cluster1/ds1/myhost.vmdk
- B. /vo1/esx_cluster1/ds1/myhost.vmdk
- C. node3_aggr3/esx_cluster1/ds1/myhost.vmdk
- D. /esx_cluster1/datastore1/myhost.vmdk
Answer: A
NEW QUESTION 81
......
100% Updated Network Appliance NS0-176 Enterprise PDF Dumps: https://freedumps.validvce.com/NS0-176-exam-collection.html
