[Jan 12, 2024] Fully Updated Free Actual BICSI OSP-002 Exam Questions
Free OSP-002 Questions for BICSI OSP-002 Exam [Jan-2024]
The OSP-002 exam tests the knowledge and skills required to design OSP infrastructure, including cabling systems, pathways, and spaces. OSP-002 exam covers a wide range of topics, including industry standards, design principles, construction techniques, and project management. Candidates are also expected to have a good understanding of fiber optic and copper cabling systems, as well as outside plant grounding and bonding principles.
BICSI OSP-002 certification exam is designed for professionals who specialize in the design and implementation of outside plant (OSP) telecommunications infrastructure. OSP refers to the cabling, hardware, and equipment that are used to connect buildings and other structures to the larger telecommunications network. OSP-002 exam is a globally recognized certification that demonstrates a designer's knowledge and understanding of OSP design principles, standards, and best practices.
The OSP-002 certification exam is beneficial for professionals who want to advance their careers in outside plant design. BICSI Outside Plant Designer (OSP) certification helps professionals stand out from their peers and demonstrates their commitment to ongoing education and professional development. It also validates their expertise in outside plant design and shows that they have the skills and knowledge necessary to design and implement successful outside plant infrastructure projects.
NEW QUESTION # 32
Coarse wavelength division multiplexing (CWDM) systems require __________ to allow transmitting in the E-Band (1260-1360 nm).
- A. 1490 nm pump lasers
- B. Low water peak fiber
- C. DFB lasers
Answer: B
NEW QUESTION # 33
The international standard for structured cabling is \_\_\_\_\_\_\_\_?
- A. ISO-9000
- B. TIA-568
- C. ISO-11801
- D. IEC-0001
Answer: C
NEW QUESTION # 34
Armored cable is used in outside plant installations to \_\_\_\_\_\_\_\_\_\_.
- A. Increase pulling tension
- B. Conduct lightning strikes
- C. Protect from dig-up damage
- D. Prevent crushing and rodent damage
Answer: D
NEW QUESTION # 35
What do Category 3, Category 5e and Category 6 designations mean?
- A. How well the cables are made
- B. Flame retardance of the cable
- C. How far the cable will work in networks
- D. The performance level of UTP cable
Answer: D
NEW QUESTION # 36
Ethernet was first developed as a \_\_\_\_ architecture using \_\_\_\_\_ cable with \_\_\_\_\_\_\_.
- A. Star, UTP, RJ-45 connectors
- B. Ring, coax, RJ-45 connectors
- C. Bus, UTP, RJ-45 connectors
- D. Bus, coax, taps
Answer: C
NEW QUESTION # 37
The development of _________ provided a low cost cabling alternative for networks.
- A. Balanced transmission on UTP cabling
- B. IBM Type 1 cable
- C. CATV coax
Answer: A
NEW QUESTION # 38
What is the maximum length of a permanently installed UTP cabling link allowed in structured cabling standards?
- A. Depends on the electronics running on the link
- B. 100 meters
- C. 90 meters
- D. 100 feet
Answer: C
NEW QUESTION # 39
Each floor should be allocated one \_\_\_\_\_\_\_ when floor space is under 10,000 sq ft.
- A. Equipment room
- B. Telcom room (closet)
- C. MUTOA
- D. User
Answer: B
NEW QUESTION # 40
What do category ratings of UTP cable (e.g. Cat 3, Cat 5e, Cat 6 and Cat 6A) mean?
- A. How well the cables are made
- B. Flame retardance of the cable
- C. How far the cable will work in networks
- D. The performance level of UTP cable
Answer: D
NEW QUESTION # 41
The loss of a fiber optic connector is defined as _____?
- A. The loss of a statistical sample of connectors
- B. The calculated loss due to geometric misalignment
- C. The loss of the connector mated to another connector
- D. One-half the loss of a mated pair of connectors
Answer: C
NEW QUESTION # 42
(Choose all correct answers)
What optical fiber types are recognized in the structured cabling standards?
- A. Multimode in backbones
- B. Singlemode in backbones
- C. Singlemode in horizontal connections
- D. Multimode in horizontal connections
Answer: A,B,D
NEW QUESTION # 43
A category-rated UTP cable (Cat 3/5e/6/6A) used for horizontal cabling has \_\_\_\_\_\_ color coded pairs of wires.
- A. 0
- B. Any even number
- C. 1
- D. 2
Answer: A
NEW QUESTION # 44
UTP cable installed above the ceiling can \_\_\_\_\_\_\_\_\_\_ the celing tiles.
- A. be hung from frames of
- B. not be laid on
- C. be laid directly on top of
- D. must be sleeved to be laid on top of
Answer: B
NEW QUESTION # 45
Loss of a fiber or any fiber in a cable is measured in __________.
- A. dB
- B. dBm
- C. milliwatts
Answer: A
NEW QUESTION # 46
To maintain rated performance, twists in each pair must be maintained to within \_\_\_\_\_\_\_ of the termination.
- A. 2.5 cm
- B. 25 mm
- C. 1 inch
- D. 1/2 inch
Answer: D
NEW QUESTION # 47
Multiple Response: Identify one or more choices that best complete the statement or answer the question.
Multimode transceivers use \_\_\_\_\_\_\_\_\_\_ sources depending on their requirements for coupled power and bandwidth.
- A. VCSEL
- B. F-P lasers
- C. LED
- D. DFB lasers
Answer: A,C
NEW QUESTION # 48
Which two of the following components are included in a backbone distribution system (BDS)? (Choose two.)
- A. Work area outlets
- B. Equipment rooms
- C. Horizontal Cable
- D. Equipment Cord
- E. Telecommunications enclosures
Answer: B,E
NEW QUESTION # 49
Multimode graded-index glass fiber optic cables are tested with \_\_\_ sources at \_\_\_\_\_\_ and \_\_\_\_\_ wavelengths.
- A. LED, 850, 1300 nm
- B. Laser, 980, 1400 nm
- C. Laser, 1310, 1550 nm
- D. LED, 650, 850 nm
Answer: A
NEW QUESTION # 50
Before UTP cabling became widely used and the industry standard, most Ethernet Networks were connected over \_\_\_\_\_\_\_ cable.
- A. Copper
- B. Telephone
- C. Shielded
- D. Coaxial
Answer: D
NEW QUESTION # 51
Individual splice loss on concatenated cables can be verified by \_\_\_\_\_\_\_\_\_\_ .
- A. OTDR testing
- B. Visual inspection
- C. Insertion loss testing
- D. Visual fault location
Answer: D
NEW QUESTION # 52
Structured cabling standards call for a maximum length of multimode fiber optic cable for backbones of
\_\_\_\_\_\_\_\_\_\_.
- A. 3000 meters
- B. 2000 meters
- C. 1000 meters
- D. 800 meters
Answer: B
NEW QUESTION # 53
Cable plant loss should be estimated during the \_\_\_\_\_\_ phase.
- A. Installation
- B. Testing
- C. Troubleshooting
- D. Design
Answer: D
NEW QUESTION # 54
Potential sources of interference for wireless LANs include \_\_\_\_\_\_\_.
- A. Other wireless networks
- B. All of the above
- C. Remote controls like door openers
- D. Moving objects
Answer: B
NEW QUESTION # 55
What UTP installation tool is needed for teminating most Cat 5e/6 jacks?
- A. Punchdown tool with 66 blade
- B. Spudger
- C. Punchdown tool with 110 blade
- D. Crimper
Answer: C
NEW QUESTION # 56
Which one of the following performance requirements are not shared by connectors and splices?
- A. Repeatability
- B. Low back reflection
- C. Low loss
- D. Durability under repeated matings
Answer: D
NEW QUESTION # 57
......
Validate your OSP-002 Exam Preparation with OSP-002 Practice Test: https://freedumps.validvce.com/OSP-002-exam-collection.html
