[May 08, 2024] Reliable HPE6-A72 Exam Tips Test Pdf Exam Material
New 2024 HPE6-A72 Test Tutorial (Updated 90 Questions)
HP HPE6-A72 (Aruba Certified Switching Associate) Certification Exam is a valuable certification that is designed to test the knowledge and skills of IT professionals in the area of Aruba switching technologies. HPE6-A72 exam is recognized by many different organizations and employers around the world, and it provides a valuable competitive advantage for IT professionals who are looking to advance their careers in the field of network switching.
NEW QUESTION # 37
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?
- A. The command terminal length 30
- B. The command more
- C. The command page
- D. The command less
Answer: C
NEW QUESTION # 38
What connectivity commands are available on AOS-CX switches? (Choose two.)
- A. tracert
- B. netstatus
- C. traceroute
- D. pathping
- E. ping
Answer: C,E
NEW QUESTION # 39
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
Answer:
Explanation:
NEW QUESTION # 40
The customer has 778 developers testing computer games on the network.
Which two actions resolve Broadcast storms? (Choose two.)
- A. Manually disable the redundant link to immediately resolve the impacted portion of the network.
- B. Utilize Spanning Tree to dynamically disable all redundant links in a segment.
- C. Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.
- D. Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD).
- E. Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.
Answer: A,B
NEW QUESTION # 41
Match each network protocol to the correct default listening port and transport protocol. Not all answers will be used.
Answer:
Explanation:
NEW QUESTION # 42
You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch.
What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?
- A. checkpoint auto confirm 10
- B. boot system secondary 10
- C. checkpoint auto 10
- D. checkpoint rollback 10
Answer: C
NEW QUESTION # 43
Core# configure terminal
Core(config)# vrf Green
Core(config-vrf)# exit
Core(config)#
Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?
- A. Core(config-if-vlan)# routing-context Green vrf
- B. Core(config-if-vlan)# ip vpn-instance Green
- C. Core(config-if-vlan)# ip vrf forwarding Green
- D. Core(config-if-vlan)# vrf attach Green
Answer: D
NEW QUESTION # 44
Which Ethernet port combination does the Aruba 5400R ZL2 switch series support?
- A. 10/100 Megabit Ethernet, Gigabit Ethernet, 25 Gigabit Ethernet, and 100 Gigabit Ethernet
- B. Gigabit Ethernet, 25 Gigabit Ethernet, and 40 Gigabit Ethernet
- C. 10/100 Megabit Ethernet, Gigabit Ethernet, and 100 Gigabit Ethernet
- D. 10/100 Megabit Ethernet, Gigabit Ethernet, and 40 Gigabit Ethernet
Answer: D
NEW QUESTION # 45
Refer to the exhibit
What is true regarding VLAN 50 according to the diagram above?
- A. VLAN 50 was never added to the vlan-database and therefore is in a down state.
- B. VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.
- C. Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
- D. VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
Answer: C
NEW QUESTION # 46
Match the terms to the correct layer of the OSI model.
Answer:
Explanation:
NEW QUESTION # 47
What are the commands to disable SSH and HTTPS services from the default VRF?
- A. Core-1(config)# no ssh server enable
Core-1(config)# no https-server enable - B. Core-1(config)# no ssh server vrf default
Core-1(config)# no https-server vrf default - C. Core-1(config)# no ssh server
Core-1(config)# no https-server - D. Core-1# no ssh server vrf default
Core-1# no https-server vrf default
Answer: B
NEW QUESTION # 48
Refer to the exhibit.
Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?
- A. 0
- B. 1
- C. 2
- D. 01001011
Answer: C
NEW QUESTION # 49
Which statement is correct regarding powering an Aruba Access Point?
- A. Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC power adapter to draw power.
- B. PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.
- C. PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.
- D. Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP.
Answer: D
NEW QUESTION # 50
Which statement is true regarding modern switching requirements?
- A. Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today's power-over-Ethernet needs.
- B. While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.
- C. Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for IoT devices are usually addressed using default wired encryption that all 802.3 Ethernet switches provide.
- D. Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of IoT devices that require security and port authentication options.
Answer: D
NEW QUESTION # 51
Refer to the exhibit.
Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?
- A. Host-B: assign the default-gateway address 10.1.20.181
- B. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
- C. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
- D. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.1
Answer: C
NEW QUESTION # 52
Refer to the exhibit.
Which command produces the above output?
- A. show interface port 1/1/10 trunk
- B. show vlan port 1/1/10
- C. show trunk port 1/1/10 extended
- D. show interface port 1/1/10 switchport
Answer: C
NEW QUESTION # 53
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command inventory
- B. The command version
- C. The command show running-configuration
- D. The command show system
Answer: D
NEW QUESTION # 54
You have completed a successful VSF stack between two switches.
Without manually assigning a backup switch, what is the expected output when issuing a show vsf command?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 55
What command will save your configuration on an Aruba AOS-CX switch so that your changes automatically load on next reboot?
- A. copy running-config default
- B. copy running-config initial-checkpoint
- C. copy running-config checkpoint startup-config
- D. copy startup-config running-config
Answer: C
NEW QUESTION # 56
Which two statements accurately describe stacking with Aruba switches? (Choose two.)
- A. A VSF stack is allowed between an AOS 5400R and an AOS-CX 6400.
- B. The VSF feature is not compatible between AOS-CX and AOS platforms.
- C. A VSF stack is allowed between an AOS-CX 6300M and 6300F switches.
- D. VSF is a core or aggregation layer stacking technology due to the high resiliency of sharing a single control plane.
- E. VSF and VSX are stacking option with the AOS-CX 8320. 8325. 8400. and 6400 models.
Answer: D,E
NEW QUESTION # 57
......
HPE6-A72 Cert Guide PDF 100% Cover Real Exam Questions: https://freedumps.validvce.com/HPE6-A72-exam-collection.html
