New ISTQB-CTAL-TA Test Materials & Valid ISTQB-CTAL-TA Test Engine
ISTQB-CTAL-TA Updated Exam Dumps [2026] Practice Valid Exam Dumps Question
NEW QUESTION # 24
As a Test Analyst you are involved in the early stages of an acceptance test for a Product Data Management system. You are asked to write test designs and test cases based on use cases. An earlyversion of the system is already available. It is expected that many things will change (including the user interface) during implementation of the new version.
The tests will be conducted by end-users with much domain knowledge who have also been involved in the project defining the user requirements (in the format of use cases) and reviewing other documentation.
What Is the BEST option regarding the level of detail and documentation required for test cases in the project?
- A. Detailed low-level test cases since many re-runs of the tests are expected.
- B. High-level test cases supported by low-level test cases to allow for traceability and enable future changes.
- C. Low-level test cases only since the end-users have extensive domain knowledge.
- D. High-level test cases only since the end-users have extensive domain knowledge and many changes are expected
Answer: D
Explanation:
High-level test cases only are the best option for this project, as they provide enough guidance for the end- users who have extensive domain knowledge and can fill in the details as they execute the tests. Moreover, high-level test cases are easier to maintain and adapt when many changes are expected in the system under test, as opposed to detailed low-level test cases that would require more effort and time to update. Verified References: ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA, Section 3.1.1, page 29.
NEW QUESTION # 25
Consider the following user story: As a student, I want to be able to buy a parking pass (priority: high) Acceptance criteria
- The student will not receive the parking pass if the payment is insufficient.
- Only registered students can buy a parking pass.
- The student can only buy one parking pass each month.
Which of the following checklist items would result in finding a defect for the user story?
- A. Is the story written from the view of the person who requested it?
- B. Does the story follow the commonly used format "As a < >, I want < > so that < >"?
- C. Are the acceptance criteria defined and testable?
- D. Is the story prioritized?
Answer: C
Explanation:
The checklist item that would result in finding a defect for the user story is "Are the acceptance criteria defined and testable?". The acceptance criteria are the conditions that a system or component must satisfy in order to be accepted by a user, customer, or other authorized entity. The acceptance criteria should be defined and testable for each user story, as they provide the basis for designing and executing test cases. The user story in this question does not have any acceptance criteria defined, which is a defect that needs to be addressed. Verified References: [ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA], Section
2.4.1, page 25.
NEW QUESTION # 26
Consider the following scenario for a metro fare system:
If you take the metro before 9:30 am or in the afternoon between 5:00 pm until 7:00 pm, you must pay full fare A saver ticket is available for metro rides between 9:30 am and 5:00 pm [both inclusive], and after 7:00 pm.
Which off the following test sets will provide the best equivalence partitioning coverage?
- A. 9:29 am, 5 01 pm, 7:30 pm, 7:31 pm, 8:00 pm
- B. 9:30 am, 9:31 am, 4:59 pm, 5:00 pm, 8:00 pm
- C. 9:30 am, 4:00 pm, 6:00 pm, 8 00 pm, 8:30 pm
- D. 8:00 am, 10:00 am, 5:15 pm, 7:01 pm, 11:00 pm
Answer: B
Explanation:
The test set D provides the best equivalence partitioning coverage, as it tests on single boundary value fully for each partition. Equivalence partitioning is a technique that divides the input domain into subdomains that are expected to behave similarly. The partitions for this scenario are:
* Before 9:30 am (full fare)
* Between 9:30 am and 5:00 pm (saver ticket)
* Between 5:00 pm and 7:00 pm (full fare)
* After 7:00 pm (saver ticket)
The test set D tests the boundary values of each partition (9:30 am, 5:00 pm, and 7:00 pm) and one value inside each partition (9:31 am, 4:59 pm, and 8:00 pm). Verified References: [ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA], Section 3.2.1, page 33.
NEW QUESTION # 27
Based on the tax system specification as described below, using boundary value analysis, which would be the best test set to explicitly test on single boundary value fully?
Tax system
A tax system needs to be updated due to new legislation. For a person with a salary of less than € 20 000 and who is married, the tax needs to be recalculated.
If a person has at least three and less than six children, an additional 10% reduction is applicable.
- A. Test set (ii)
- B. Test set (iii)
- C. Test set (i)
- D. Test set (iv)
Answer: A
Explanation:
The test set B is the best test set to explicitly test on single boundary value fully, using boundary value analysis. Boundary value analysis is a technique that tests the values at or near the boundaries of an input domain. The boundaries for this scenario are:
* Salary less than €20 000
* Number of children at least three and less than six
The test set B tests the boundary values of each boundary (€19 999, €20 000, three children, six children) and one value inside each boundary (€19 998, €20 001, four children). Verified References: [ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA], Section 3.2.2, page 35.
NEW QUESTION # 28
Which of the following descriptions is an example of the use of defect taxonomies?
- A. Grouping defects found during execution by functional area
- B. Following a defect management process throughout testing
- C. Running tests with the aim of finding as many defects as possible
- D. Using a list of known defect types to penetrate the security of computer systems
Answer: D
Explanation:
The description that is an example of the use of defect taxonomies is using a list of known defect types to penetrate the security of computer systems. A defect taxonomy is a classification of defects based on their characteristics, causes, or effects. A defect taxonomy can be used to design test cases that target specific types of defects or vulnerabilities in a system or component. Verified References: [ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA], Section 3.8.1, page 47.
NEW QUESTION # 29
A major upgrade of business software has been undertaken, with many new facilities added in response to the wishes of the (internal company) staff. There are now very different screens presented to users, depending on their roles within the business. Due to the nature of the business,computational accuracyis regarded as the area of greatest business risk.
Which of the following quality characteristics would you focus on the MOST when testing the system?
SELECT ONE OPTION:
- A. Installability
- B. Functional correctness
- C. Functional appropriateness
- D. Functional completeness
Answer: B
Explanation:
Comprehensive and Detailed In-Depth Explanation:
* A (Functional appropriateness):Verifies that the function serves its intended purpose but does not focus on accuracy.
* B (Installability):Unrelated to computational accuracy.
* C (Functional completeness):Ensures that all specified functionality is present, but not about accuracy.
* D (Functional correctness):Correct. Sincecomputational accuracyis the primary concern, testing must focus on ensuring that all calculations are correct.
Therefore, the correct answer isD (Functional correctness).
NEW QUESTION # 30
Which test technique is MOST closely associated with classification tree diagrams?
SELECT ONE OPTION
- A. Equivalence partitioning
- B. Decision table testing
- C. State transition testing
- D. Use case testing
Answer: A
Explanation:
Comprehensive and Detailed in Depth Explanation:
* Classification tree diagramsare used to visualize combinations of input classes or partitions, helping in identifying and selecting test cases.
* They are closely associated withEquivalence Partitioningbecause they help in identifying classes (partitions) and their combinations.
* State transition testing (A)involves states and transitions, not combinations of classes.
* Decision table testing (C)involves logical conditions and outcomes, rather than class combinations.
* Use case testing (D)focuses on user interactions and scenarios.
Therefore, the correct answer isB (Equivalence partitioning).
NEW QUESTION # 31
Sell-It-Cheap salesrooms organize general and specialist sales where items are sold to the highest bidder.
There is asliding scale of commission charges, based on the price of items sold, with lower-priced items attracting a higher percentage. All items sold have a price in multiples of £1.
New commission bandings after customer feedback:
* Items sold for£150 or lessattract a flat-rate fee of£7.00
* Items otherwise sold forless than £500have a fee of6%
* Items otherwise sold forless than £1000have a4.5%fee
* Items otherwise sold forless than £5000have a3.5%fee
* Items sold for£5000 or morehave a3%fee
* Updated rule:Items sold between£500 and £749have a fee of5.5%
What tests would be appropriate to test this change in commission bandings, using the 2-point boundary value analysis technique?
SELECT ONE OPTION:
- A. £499, £500, £749, £750, £999, £1000
- B. £748, £749, £750, £751
- C. No additional tests required; existing BVA tests can be used
- D. £500, £749, £999, £1000
Answer: A
Explanation:
Comprehensive and Detailed In-Depth Explanation:
* Boundary Value Analysis (BVA)focuses ontesting at the edgesof the input range.
* The critical boundaries are around thenew commission banding change (from £500 to £749).
* To fully test this change, BVA should include:
* Lower boundary:£499, £500
* Transition points:£749, £750
* Upper boundary:£999, £1000
Therefore, the correct answer isD (£499, £500, £749, £750, £999, £1000).
NEW QUESTION # 32
Which of the following appropriate tasks for the Test Analyst is performed during the test analysis phase?
- A. Examine the test basis
- B. Evaluate status against exit criteria
- C. Review test estimates
- D. Create a test execution schedule
Answer: A
Explanation:
Examining the test basis is an appropriate task for the Test Analyst during the test analysis phase, as it involves identifying and evaluating the sources of information for test analysis, such as requirements, design documents, user stories, etc. Reviewing test estimates, creating a test execution schedule, and evaluating status against exit criteria are tasks that belong to other phases of testing, such as test planning, test implementation, and test closure. Verified References: ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA, Section 2.1.1, page 19.
NEW QUESTION # 33
company in the medical domain has adopted methodical testing as its preferred test strategy Before being able to release to the market an external audit on the test process is mandatory. The test team consists of a mix of highly experienced domain-based testers and junior testers who only recently joined the company.
What is the BEST option regarding the level of detail and documentation required for test cases in the project?
- A. High-level test cases since it will make the process more effective and it will make the best use of the knowledge and skills of the experienced I domain testers.
- B. High-level test cases since this is consistent with the chosen test strategy
- C. Low-level test cases since it will make the process more effective and it will make the best use of the knowledge and skills of the experienced domain testers.
- D. Low-level test cases since this will support both the external audit and the new junior testers.
Answer: D
Explanation:
Low-level test cases are the best option for this project, as they provide more detail and documentation that will support both the external audit and the new junior testers. The external audit will require evidence of how testing was performed and what results were obtained, which can be provided by low-level test cases. The new junior testers will benefit from having more guidance and instructions on how to execute the tests and what to expect as outcomes, which can also be provided by low-level test cases. Verified References: ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA, Section 3.1.1, page 29.
NEW QUESTION # 34
Rather than developing an e-commerce product, management has decided to acquire a COTS package The e- commerce product needs to interface.
with backend applications such a finance, stock control and order delivery. You are asked to define a test plan for this project.
Given just the information in the scenario, which of the following software quality characteristics must be included in your test plan?
- A. Interoperability
- B. Maintainability
- C. Portability
- D. Reliability
Answer: A
Explanation:
The software quality characteristic that must be included in the test plan for this project is interoperability.
Interoperability is a software quality characteristic that evaluates the degree to which two or more systems or components can exchange information and use the information that has been exchanged. This characteristic is relevant for a project that involves acquiring a COTS package that needs to interface with backend applications such as finance, stock control, and order delivery. Verified References: [ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA], Section 5.3.1, page 67.
NEW QUESTION # 35
Return Item Use Case: The following depicts a main path through the use case, 'Return Item'.
Coverage Rules:
* One test case for basic behavior
* Multiple alternate behaviors may be incorporated into one test case if mutually compatible
* Nested alternate behaviors (like retry attempts) should be amalgamated into a single test case How many test cases should be designed?
SELECT ONE OPTION
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Comprehensive and Detailed in Depth Explanation:
* Basic Behavior:One test case for the main path without errors (1 test case).
* El (Already logged in):Can be combined with the basic path (1 test case).
* E2 and E3 (Invalid login and account freeze):These are retry scenarios and can be amalgamated as one test case (1 test case).
* E4 (Go-Back):This occurs at two different steps (M7 and M9) but can be incorporated as a single test case because the behavior is the same (1 test case).
Hence, the total number of test cases is3(basic, login exception, go-back exception).
NEW QUESTION # 36
To enhance both the effectiveness and efficiency of the test design phase, the purchase of a test design tool is being considered. Which one of these statements best characterizes a test design tool?
- A. A test design tool validates models of the software.
- B. A test design tool generates test inputs from requirements
- C. A test design tool enables individual tests to be traced to requirements
- D. A test design tool enables tests to be executed automatic ally.
Answer: B
Explanation:
The statement that best characterizes a test design tool is that a test design tool generates test inputs from requirements. A test design tool is a tool that supports the test design activity by generating test inputs or test cases from a specified source, such as requirements, models, or code. A test design tool can use various techniques, such as equivalence partitioning, boundary value analysis, decision tables, state transition diagrams, etc., to generate test inputs or test cases. Verified References: [ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA], Section 6.2.1, page 77.
NEW QUESTION # 37
For an ATM banking project the following applies: "When the user first inserts a valid credit card, the system considers the user to be in an unauthenticated state. When requesting a cash advance, the user must be in an authenticated state. The user authenticates by entering the correct PIN code for the card they have used.
During the user authentication, the system shall allow the user to enter their PIN codeup to three times before failing the authentication and rejecting the card. On the first and second try, the system shall prompt the user to re-enter the PIN code " Suppose you are concerned that, depending on the number of invalid PIN codes entered, the system may behave incorrectly. Which of the following test design techniques is specifically targeted at finding such failures?
- A. Pairwise testing
- B. Classification tree technique
- C. State transition testing using 1-switch coverage
- D. Equivalence partitioning
Answer: C
Explanation:
The test design technique that is specifically targeted at finding failures depending on the number of invalid PIN codes entered is state transition testing using 1-switch coverage. State transition testing is a technique that tests the behavior of a system or component based on its states and transitions between them. A 1-switch test case is a test case that covers two states and the transition between them. This technique can test how the system reacts to different sequences of events and how it handles invalid inputs. Verified References:
[ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA], Section 3.4.1, page 39.
NEW QUESTION # 38
A software component for a game application calculates a player's trophy level based on two input parameter values: Points Earned and Level of Difficulty. A total score is calculated by the component as:
Total Score = Points Earned × Level of Difficulty
The trophy levels are:
* Blue- total score equal to or less than 40
* Silver- total score > 40
* Gold- total score > 70
* Diamond- total score > 80
* Platinum- total score > 90
The component then outputs the correct trophy level.
Applying theEquivalence Partition test design techniqueto this component, what percentage of output partitions have been exercised by the following suite of test cases?
* Player 1 - Points earned 25, level of difficulty 2
* Player 2 - Points earned 20, level of difficulty 3
* Player 3 - Points earned 30, level of difficulty 1
SELECT ONE OPTION:
- A. 40%
- B. 60%
- C. 10%
Answer: A
Explanation:
Comprehensive and Detailed In-Depth Explanation:
To determine the answer, we first calculate the total score for each player:
* Player 1:25×2=5025 \times 2 = 5025×2=50 (Silver)
* Player 2:20×3=6020 \times 3 = 6020×3=60 (Silver)
* Player 3:30×1=3030 \times 1 = 3030×1=30 (Blue)
The output equivalence partitions based on the trophy levels are:
* Blue:Total score # 40
* Silver:Total score > 40 and # 70
* Gold:Total score > 70 and # 80
* Diamond:Total score > 80 and # 90
* Platinum:Total score > 90
From the given test cases, the following partitions have been exercised:
* Blue (Player 3)
* Silver (Player 1 and Player 2)
Out of the 5 possible output partitions (Blue, Silver, Gold, Diamond, Platinum), only2 partitions (Blue and Silver)have been exercised. Therefore, the percentage of partitions covered is:
A number and a percentage sign AI-generated content may be incorrect.
Hence, the correct answer isB (40%).
NEW QUESTION # 39
You are testing a hospital patient management system. New or amended patient data is captured by hospital administrators using an in-house patient capture application and transmitted to one or more hospital departments depending on the nature of the medical condition. Each department operates its own software package.
A new release has been scheduled which includes an improved user interface to the patient capture application as well as changes to the patient data to meet new regulatory requirements.
You are the test analyst for this release, working alongside a Technical Test Analyst. Which of the following requirements MOST align to your responsibilities to test as a Test Analyst?
* R01:New and amended patient data can be successfully read and processed by receiving hospital department systems
* R02:Patient data will be transmitted and received by hospital department systems within ten seconds of entry
* R03:Patient data transmitted to other hospital department systems will remain secure and cannot be accessed by unauthorized third parties
* R04:High volumes of data can be successfully received and processed while the user interface is being used
* R05:The new user interface is appropriate for the needs of all hospital administrator roles SELECT ONE OPTION:
- A. R01, R05
- B. R03, R04
- C. R02, R03
- D. R01, R02
Answer: A
Explanation:
Comprehensive and Detailed In-Depth Explanation:
* R01:Verifying that new and amended patient data can be successfully processed falls within the test analyst's responsibility, focusing on functional accuracy.
* R05:Ensuring the user interface meets the needs of administrators is a usability testing task, which also falls within the Test Analyst's role.
* R02 and R03:These are more related to performance and security testing, typically handled by a Technical Test Analyst.
* R04:High-volume processing and performance are the domain of the Technical Test Analyst.
Therefore, the correct answer isA (R01, R05).
NEW QUESTION # 40
You are testing a hospital patient management system after a change to the patient capture application.
You are running interoperability tests. Which TWO of the following are NOT interoperability defects?
a) The patient name field is truncated on one of the receiving department systems b) Hospital administrators find the new patient-capture application screens difficult to navigate c) Two department systems are unable to recognise the format of international telephone numbers for foreign patients d) Existing patient data takes too long to retrieve by the patient-capture application e) There are spelling errors in the field names on some screens SELECT ONE OPTION
- A. c, e
- B. a, c
- C. a, b
- D. b, d
Answer: D
Explanation:
Comprehensive and Detailed in Depth Explanation:
Interoperability testingverifies that different systems can work together and correctly exchange data.
* a) Truncated patient name:An interoperability defect as it indicates incorrect data handling between systems.
* b) Difficult navigation:Ausability defect, not related to system interoperability.
* c) Incorrect phone number format recognition:An interoperability defect because it affects data exchange.
* d) Slow data retrieval:Aperformance defect, not related to system interaction.
* e) Spelling errors in field names:Ausability or user interface defect, not interoperability.
Therefore, the correct answer isD (b, d).
NEW QUESTION # 41
Although usability is an important aspect for a new planning system, due to availability constraints, the usability evaluation shall be performed without Which of the following is a usability technique that can be applied in this situation?
- A. Usability prototyping
- B. Usability review, e.g., heuristic evaluation
- C. Usability survey
- D. Usability lab sessions
Answer: B
Explanation:
The usability technique that can be applied in this situation is usability review, e.g., heuristic evaluation.
Usability review is a technique that evaluates the usability of a system or component based on a set of criteria or guidelines, such as heuristics, standards, or checklists. Usability review can be performed without users, as it relies on the expertise and judgment of the reviewers. Verified References: [ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA], Section 5.2.1, page 63.
NEW QUESTION # 42
In the recent past, you have learned that test automation just using capture & playback tooling, possibly enhanced with some test programming, has limitations. For the next banking project, that will be run using Agile methods, you want to implement a keyword-driven test automation approach. You have already started to define some high-level test cases for the account transfer user story:
TC 1 transfer € 150 from Lars to Ann, verify Ann's balance to be € 150
TC 2 transfer € 300 from Tim to Ann, verify Ann's balance to be € 450
In the context of implementing the keyword-driven test automation approach, which of the following activities should now be conducted by the Test Analyst?
- A. Define keywords to be implemented, eg, check balance.
B Design test navigation scripts. - B. Select a tool to support keyword-driven testing
- C. Work together with a developer to define a test automaton architecture
Answer: A
Explanation:
The activity that should now be conducted by the Test Analyst in the context of implementing the keyword- driven test automation approach is to define keywords to be implemented, e.g., check balance. A keyword- driven test automation approach is an approach that uses keywords to represent actions or data in a test case.
The keywords are then interpreted by a test execution tool or framework that performs the corresponding actions or data manipulation. The Test Analyst is responsible for defining the keywords that are relevant and meaningful for the test cases, such as check balance, transfer money, verify message, etc. Verified References: [ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA], Section 6.1.1, page 73.
NEW QUESTION # 43
Which TWO of the following BEST explain why stakeholders should review and understand test conditions and test cases?
a) To make sure that the requirements have been understood by the testers b) To ensure that adequate coverage of the test basis has been achieved by the tests c) To ensure that the project remains on schedule, as testing is a key activity d) To assess the skills and talent of the test analysts e) To enable the test manager to select the best test approaches in the project test plan SELECT ONE OPTION
- A. b and e
- B. c and d
- C. a and b
- D. c and e
Answer: C
Explanation:
Comprehensive and Detailed in Depth Explanation:
* a) To make sure that the requirements have been understood by the testers:Stakeholder review helps validate that the test conditions and cases reflect the requirements correctly.
* b) To ensure that adequate coverage of the test basis has been achieved by the tests:Stakeholders confirm that the tests cover all relevant aspects of the requirements and risk areas.
* c) To ensure that the project remains on schedule, as testing is a key activity:While important, this is not a primary reason for stakeholders to review test conditions.
* d) To assess the skills and talent of the test analysts:This is not the purpose of reviewing test conditions.
* e) To enable the test manager to select the best test approaches in the project test plan:This is a test planning activity, not a reason for stakeholder review.
Therefore, the correct answer isB (a and b).
NEW QUESTION # 44
You are testing software which is being ported from one platform to another. There are no documented requirements and there is no time budgeted for writing them.
Which type of test technique is most useful in this situation?
- A. Defect-based test technique
- B. Experience-based test technique
- C. Black-box test technique
- D. White-box test technique
Answer: B
Explanation:
The type of test technique that is most useful in this situation is experience-based test technique. Experience- based test technique is a technique that relies on the knowledge and intuition of the testers to design and execute test cases based on their experience with similar systems or technologies. This technique is suitable for testing software that has no documented requirements and no time budgeted for writing them, as it can help to identifypotential risks and defects based on past observations and lessons learned. Verified References: [ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA], Section 3.7.1, page 45.
NEW QUESTION # 45
An airline provides self-service check-in kiosks for passengers. The following use case has been created for the self-service check-in process.
Coverage Rules:
* One test case should be designed for the basic behavior
* One test case should be designed for each alternate and error handling behavior Applying these rules to the Self Service Check-in Use Case, how many test cases should be designed?
SELECT ONE OPTION
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Comprehensive and Detailed in Depth Explanation:
To determine the number of test cases, we follow the coverage rules:
* Basic Behavior:One test case for the standard check-in process without errors (1 test case).
* Error Handling (Exceptions):There are 7 exceptions listed (E1 to E7), and each needs a separate test case.
Hence, the total number of test cases is1 (basic) + 7 (error scenarios) = 8.
Therefore, the correct answer isB (8).
NEW QUESTION # 46
Sell-It-Cheap salesrooms organize general and specialist sales with commission charges based on the item price. Following customer feedback, the commission bandings have been changed:
* £500 - £749:5.5% fee
* £750 - £999:4.5% fee
What tests would be appropriate to test this change in commission bandings using the 2-point boundary value analysis technique?
SELECT ONE OPTION
- A. £499, £500, £749, £750, £999, £1000
- B. £748, £749, £750, £751
- C. No additional tests required; existing BVA tests can be used
- D. £500, £749, £999, £1000
Answer: A
Explanation:
Comprehensive and Detailed in Depth Explanation:
Boundary Value Analysis (BVA)focuses on values at the edges of equivalence partitions, including just inside and just outside the boundary.
* Therevised boundariesare:
* £500 and £749for the new 5.5% fee band
* £750 and £999for the 4.5% fee band
* Testing bothvalid and invalid boundariesis essential to ensure accurate fee calculations.
The correct test cases are:
* £499 (just below the lower boundary)
* £500 (at the lower boundary)
* £749 (at the upper boundary of the first band)
* £750 (at the lower boundary of the second band)
* £999 (at the upper boundary of the second band)
* £1000 (just above the upper boundary)
Therefore, the correct answer isD (499, 500, 749, 750, 999, 1000).
NEW QUESTION # 47
During testing of a mobile banking application, traceability matrices are defined and maintained between test cases and user stories. This task is supported by a test management tool. Testing isexpected to report on the coverage level of the implemented and tested user stories. Which of the following test types is most likely being performed?
- A. Functional correctness testing
- B. Functional completeness testing
- C. Interoperability testing
- D. Functional appropriateness testing
Answer: B
Explanation:
The test type that is most likely being performed is functional completeness testing. Functional completeness testing is a test type that verifies that all the specified functional requirements have been implemented and tested. This test type is supported by traceability matrices that show the relationship between test cases and user stories, and by reporting on the coverage level of the implemented and tested user stories. Verified References: [ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA], Section 5.1.1, page 59.
NEW QUESTION # 48
You are running a regression test suite using a keyword-driven test approach for automation. The test suite has been enhanced for the current release to include:
* Three new test cases covering new business functionality
* Several new keywords, as project schedule constraints mean that more effective maintenance of the automated test cases is required However, the automated suite failed unexpectedly when executing one of the new test cases, which was also utilizing a new keyword.
As Test Analyst, what should be your first step?
SELECT ONE OPTION:
- A. Remove the test case from the regression suite and convert it to a manual test, to reduce further impact on project schedules
- B. Examine the sequence of tests that led up to the failure to determine if the problem occurred in a previous step
- C. Ask the technical test analyst to review the keyword script(s), as this is a new keyword and is the most likely cause of failure
- D. Run the test case manually to see if the failure lies in the System Under Test (SUT). If the test failsmanually, raise a defect report
Answer: C
Explanation:
Comprehensive and Detailed In-Depth Explanation:
Since the failure occurred when using anew keyword, the most logical first step is to involve theTechnical Test Analystto review the keyword script. This is because the issue may lie in the implementation or integration of the new keyword within the automated framework.
* Option A:Investigating the test sequence is important but not the first step when the problem clearly points to the new keyword.
* Option B:Removing the test case without identifying the root cause is not a recommended practice.
* Option C:Manually executing the test without analyzing the automation script does not address the potential problem in the keyword itself.
* Option D:Since the problem is linked to a new keyword, it makes sense to review the keyword script first.
Therefore, the correct answer isD (Ask the technical test analyst to review the keyword script(s)).
NEW QUESTION # 49
......
ISTQB-CTAL-TA Sample with Accurate & Updated Questions: https://freedumps.validvce.com/ISTQB-CTAL-TA-exam-collection.html
