[Nov-2024] MS-721 Dumps PDF - MS-721 Real Exam Questions Answers
MS-721 Dumps 100% Pass Guarantee With Latest Demo
NEW QUESTION # 37
You have two users named User1 and User2.
You need to configure User2 as a call delegate for Uset1. The solution must meet the following requirements:
* Minimize disruptions to User1.
* Prevent User2 from placing cans on behalf of User1.
* Prevent User2 from modifying the settings of User1.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - From the Microsoft Teams admin center, select Voice, select Phone numbers, and then select the phone number of User1.
2 - For User2, set Permission to Receive calls, and then set Allow change call settings to Off.
3 - Instruct User 1 to sign in to tthe Microosft Teams client, establish...
NEW QUESTION # 38
You need to connect the analog intercoms to Teams Phone.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create a resource account for each intercom.
- B. Register the ATAs with a Teams-certified SBC.
- C. Create a trusted application endpoint for Teams.
- D. Enable Direct Routing to a Teams-certified SBC.
- E. Create a configuration profile for IP phones.
Answer: B,D
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-analog-devices This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
NEW QUESTION # 39
You have a new Microsoft Teams Rooms on Windows deployment.
You need to enable the automatic acceptance of proximity-based meeting invitations.
What should you configure?
- A. Bluetooth beaconing
- B. front row
- C. coordinated meetings
- D. a customization policy
- E. a meeting policy
Answer: A
Explanation:
https://support.microsoft.com/en-au/office/cast-content-from-your-desktop-to-a-microsoft-teams- room-6d62cdbb-3da2-4bb9-80bd-9cf1098beb3d
NEW QUESTION # 40
You use Microsoft Teams live events.
You configure a live events policy as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://learn.microsoft.com/en-us/microsoftteams/teams-live-events/plan-for-teams-live-events
NEW QUESTION # 41
You are configuring the new call queue to replace the response group.
Which setting should you disable to ensure that the agents can receive calls from the call queue?
- A. Attendant routing
- B. Music on hold
- C. Round robin
- D. Conference mode
Answer: D
NEW QUESTION # 42
You have a Microsoft Teams Phone deployment.
You are deploying a new remote site.
You have a Session Border Controller (SBC) that has an E1/T1 Primary Rate Interlace (PRI) deployed to the remote site.
You plan to deploy a Survivable Branch Appliance (SBA) to ensure PSTN connectivity.
Which type of endpoints are supported by the SBA?
- A. standard SIP devices registered to the SBC
- B. auto attendants in Microsoft Teams
- C. Microsoft Teams Windows desktops
- D. audio conferencing in Microsoft Teams
Answer: C
Explanation:
https://learn.microsoft.com/en-us/microsoftteams/direct-routing-survivable-branch-appliance
NEW QUESTION # 43
You have a Teams Phone deployment.
You are designing a meeting space that contains a Teams certified conference phone.
You need to configure the phone to meet the following requirements:
Show the calendar on the display by default
Support one-touch join for Teams meetings
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create and assign an Audio Conferencing policy
- B. Create and assign a Teams IP phone policy
- C. Assign a Shared Device license to the phone
- D. Enable the Cloud Video Interop for Teams service
- E. Assign a Microsoft Teams Rooms Pro license to the phone
Answer: A,E
Explanation:
B: Teams Rooms license service plan comparison
The following table shows the services included in each Teams Rooms license.
Note: Microsoft Teams Rooms licenses
Microsoft offers two licenses for Teams Rooms systems that participate in Teams meetings and calls:
Microsoft Teams Rooms Pro delivers enhanced in-room meeting experiences like intelligent audio and video, front row and large galleries, and dual screen support. The Teams Rooms Pro license also provides advanced management features like remote device management, conditional access policies, and detailed device analytics.
Teams Rooms Pro is a great fit for medium and enterprise organizations, as well as smaller organizations with larger room counts or more advanced needs. Teams Rooms Pro licenses can be used to license both certified Teams Rooms systems and Teams Panels.
Microsoft Teams Rooms Basic provides core meeting experiences to organizations that purchase a certified Microsoft Teams Rooms system, at no additional cost. The Teams Rooms Basic license includes scheduling, joining meetings, content sharing, and collaborative white boarding, as well as basic security and management capabilities out-of-the-box.
Incorrect:
Not C:
Microsoft Teams Shared Devices licenses aren't supported on and won't work with Teams Rooms devices. Teams Rooms devices should only be assigned Teams Rooms Basic or Teams Rooms Pro licenses.
Not E: Cloud Video Interop (CVI) is a Microsoft Qualified third-party solution that enables third-party meeting rooms (telepresence) and personal video devices (VTCs) to join Microsoft Teams meetings.
With Microsoft Teams, you get rich online content collaboration in meetings that include audio, video, and content sharing.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/rooms/rooms-licensing
NEW QUESTION # 44
Case Study 3 - Contoso, Ltd
Overview
Company Information
Contoso, Ltd. is an international manufacturing company that has 2,000 employees.
Contoso currently uses a third-party meeting service. The company plans to migrate the meeting service to Microsoft Teams and replace all legacy video teleconferencing (VTC) devices.
Physical Locations
Contoso has offices in Toronto, New York, Rome, and London. The company has a global sales team that works remotely.
Existing Environment
Active Directory Environment
The on-premises network contains an Active Directory Domain Services (AD DS) forest named contoso.com.
Microsoft 365 and Teams Environment
Contoso has a Microsoft 365 subscription. All users are licensed for Microsoft 365 E5 and Teams Premium. All users are enabled for Teams Phone by using Operator Connect.
The contoso.com domain syncs to Microsoft 365 by using Azure AD Connect cloud sync. All users use the Microsoft Authenticator app for multi-factor authentication (MFA) to cloud services.
A Microsoft Surface Hub device is deployed to the boardroom in each office.
The reception area at the Toronto office is configured to use a phone number of +14165555555 in Teams.
Problem Statements
Contoso identifies the following issues:
- A user in the London office cannot locate the recorded files from a recurring Teams meeting.
- Executives in the New York office report having to use Microsoft Authenticator to access their Microsoft OneDrive files from the Surface Hub.
- A user in the Toronto office reports receiving incoming calls while attending Teams meetings instead of having calls sent automatically to voicemail.
Requirements
Planned Changes
Contoso plans to implement the following changes:
- Deploy a new Teams-certified endpoint to all the boardrooms and huddle spaces in all the offices.
- Start a pilot project to deploy an Intelligent Speaker to the boardroom in the Rome office and evaluate transcription and voice attribution capabilities.
- Deploy a Teams shared device to the lunchroom in the Toronto office. Calls placed to
+14165555555 must ring in both the reception area and the lunchroom.
Technical Requirements
Contoso identifies the following technical requirements:
- The endpoint deployed to each boardroom must include a console on the table. The endpoint must automatically invite the existing Surface Hub when joining a Teams meeting.
- The sales team must be able to temporarily sign in to the endpoints deployed to the huddle spaces to respond to Teams messages and attend video calls.
- The endpoints deployed to the huddle spaces must allow only outbound emergency calls when a user is NOT signed in.
- During Teams meetings, the sales team must have a watermark displayed on shared content.
You need to implement the planned changes for the lunchroom device in the Toronto office.
What should you use?
- A. a calling policy
- B. hot desking
- C. call hold
Answer: A
NEW QUESTION # 45
You have a Microsoft Teams deployment.
You have two groups that have meeting requirements as shown in the following table.
You need to recommend which type of meeting to use for the groups.
What should you recommend for each group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 46
You have a Teams Phone deployment that uses Direct Routing on a single Session Border Controller (SBC).
Users report that outbound PSTN calls are failing, but inbound PSTN calls are successful.
When you review the SBC logs, you discover that Microsoft is responding to SIP option requests, but is NOT sending SIP option requests.
What is the cause of the issue?
- A. The online PSTN gateway is disabled.
- B. The phone numbers of the users are defined by running the New-csTeamsUnassignedNuirtoer Treatment cmdlet.
- C. An SBC certificate is expired.
- D. An external DNS entry is missing from the FQDN of the SBC.
Answer: A
Explanation:
Issues that affect outbound direct routing calls
You might experience various issues when you use Direct Routing to make outbound calls from a Microsoft Teams client to a Session Border Controller (SBC). These issues include the following:
An incorrect caller ID is displayed to the call recipient.
A connection to the SBC is not established.
Some users in a tenant are unable to make calls.
No users in a tenant are able to make calls.
No users are able to make calls
If none of the users are able to make calls, the calls are probably not reaching the SBC. Check for one of the following causes.
Cause 1
Teams has a disabled gateway.
Resolution 1
Use the Microsoft Teams admin center to make sure that the gateway that's used by Teams is available and enabled.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/troubleshoot/phone-system/direct-routing/issues-with-outbound-calls
NEW QUESTION # 47
You have a dial plan named DPI.
You need to assign DPI to a new Microsoft Teams user named User1. You must verify that the appropriate dial plan and the associated normalization rules are assigned to User1.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Graphical user interface, text, application, email Description automatically generated
Reference:
https://docs.microsoft.com/en-us/microsoftteams/create-and-manage-dial-plans
NEW QUESTION # 48
Hotspot Question
You have a dial plan named DPI.
You need to assign DPI to a new Microsoft Teams user named User1.
You must verify that the appropriate dial plan and the associated normalization rules are assigned to User1.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
The Get-CsEffectiveTenantDialPlan cmdlet returns information about the effective tenant dial plan in an organization. The returned effective Tenant Dial Plan contains the EffectiveTenantDialPlanName and the Normalization rules that are effective for the user while using the EnterpriseVoice features.
https://docs.microsoft.com/en-us/microsoftteams/create-and-manage-dial-plans
NEW QUESTION # 49
You need to provision a Microsoft Teams-certified common area phone device at a field site. The solution must ensure that a standard user can complete the physical handset tasks without sharing credentials.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
Graphical user interface, text, table Description automatically generated with medium confidence
Reference:
https://docs.microsoft.com/en-us/MicrosoftTeams/devices/remote-provision-remote-login
NEW QUESTION # 50
Hotspot Question
Normalization rules are configured as shown in the following exhibit.
Use the drop down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 51
You need to validate the limited pilot based on the technical requirements.
What should you use?
- A. Microsoft 365 network connectivity test tool
- B. the test -CsTeamsShiftsConnectionValidflte cmdlet
- C. the Teams device usage report in the Microsoft Teams admin center
- D. self-help diagnostics for Teams
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoft-365/enterprise/assessing-network-connectivity?view=o365-worldwid
Topic 2, Litware Case Study 1
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference into rm.it ion that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section-To start the case study To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Litware, Inc. is an online retailer.
Litware is replacing its telephony platform with Microsoft Teams Phone.
Currently, all users are assigned Microsoft 365 E3 licenses.
Telephony Environment
The existing telecommunications system has several third-party IP-PBXes at the corporate and warehouse sites- Currently, the PBXes are linked through the corporate WAN and an inter-office dial plan is in place.
A unique PSTN direct inward dial (DID) is assigned to each user. The last five digits of each DID are used as an extension.
Litware piloted Microsoft Skype for Business Server Enterprise Voice, but has since decided to migrate directly to Teams Phone. During the pilot, a response group was created, and the response group is still in use.
Agents in the response group use Skype for Business Server-certified handsets.
Locations
Litware has global retail stores and datacenters-
The telephony topology contains the following four types of sites:
Corporate sites
The corporate sites contain information workers who collaborate by using the Teams desktop client and SharePoint Online.
The reception desk at each corporate site has an analog intercom with an integrated door control. Each intercom connects to an existing PBX by using an FXS Analog Telephony Adapter (ATA).
SIP trunks are delivered directJy to the site by using a resilient WAN that connects directly to the on-site PBX solution.
Wa rehouse sites
The warehouse sites are critical to the business. Users at these sites use either the Teams desktop client or the Teams mobile client.
Each warehouse has a public announcement (PA) system that connects to the PBX by using a SIP ATA along with the sites' existing ISDN trunks.
Currently, users ax the company's warehouse in Georgia can call the PA system by dialing 123456.
All calls to emergency services from the warehouses are played over the warehouses' PA system automatically.
WAN connectivity at the warehouses can be unreliable, so local PSTN connectivity is preferred as compared to centrally hosted connectivity.
Retail sites
Each retail site has only one or two desk phones and a specialized point of sale (POS) computer that cannot run the desktop or web versions of the Teams client-Users at the retail sites have the Teams app and an associated data plan installed on their mobile device. Currently, each retail site uses a managed SD-WAN appliance to connect to both the internet and the corporate WAN. The users report that in the event of an internet outage at the retail sites, they can use their mobile devices, which have strong reception.
Planned Changes
Litware plans to implement the following changes:
* Maintain the existing emergency call PA integration.
* Replace the existing IP-PBX solutions by using Teams Phone.
* Consolidate all its PSTN trunks by using region-specific datacenters, wherever possible.
During the planned deployment of Teams Phone, Litware will open a new retail site in the United Kingdom that will have five users. Litware does not have any existing telephony in the United Kingdom. Management at the new retail site wants to use Microsoft Teams Calling Plans for the users.
You are opening a new warehouse site in Melbourne. The new warehouse will connect to a phone carrier by using a Session Border Controller (SBC). Dialing rules are an area code of two digits beginning with a zero followed by a subscriber number of eight digits. For example, an E.164 number of +61370105550 will be translated to 03 7010 5550, and +61255505550 will be translated to 02 5550 5550.
Technical Requirements
Litware identifies the following technical requirements:
- Minimize the amount of voice traffic over the-WAN.
- Whenever possible, use natively supported Teams solutions.
* Avoid replacing existing analog device adapters and SIP phones.
* Assign a Microsoft 365 Phone System license to all the users listed in a CSV file.
* Ensure that the retail sites can place and receive calls in the event of a WAN failure.
* Assign a phone number of +61370105550 to a user named User1. User1 is located at a corporate site.
* Ensure that the warehouse sites maintain calling in the event of an internet outage or Teams service failure.
* Provide users at the United Kingdom retail site with phone numbers. The users must only be allowed to make in-country calls.
* Replace the response group from the Skype for Business Server Voice Enterprise pilot with a call queue. The agents must be able to use their existing handset.
NEW QUESTION # 52
You need to validate the limited pilot based on the technical requirements.
What should you use?
- A. Microsoft 365 network connectivity test tool
- B. the test -CsTeamsShiftsConnectionValidflte cmdlet
- C. the Teams device usage report in the Microsoft Teams admin center
- D. self-help diagnostics for Teams
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoft-365/enterprise/assessing-network-connectivity?view=o365-worldwide
NEW QUESTION # 53
You need to recommend network design changes that must be implemented before the Skype for Business Server to Microsoft Teams migration.
What should you recommend for the Vancouver facility users and the remote sale team users? To answer, drag the appropriate recommendation to the correct users. Each recommendation may be used once, more than once, or not at all. Vou may need to drag the split bar between panes or scroll to view content NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
A white rectangular object with blue dots and black text Description automatically generated
Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/set-cscallinglineidentity?view=skype-ps
NEW QUESTION # 54
......
The MS-721 exam is a beta exam, which means it is still in the testing phase and is not yet available for public release. Beta exams are a critical component of Microsoft's certification development process, as they provide an opportunity for candidates to provide feedback on the exam's content and structure. This feedback is used to refine the exam before it is released to the public.
Dumps Real Microsoft MS-721 Exam Questions [Updated 2024]: https://freedumps.validvce.com/MS-721-exam-collection.html
